The Linksys RE7350 setup process consists of easy steps and a seamless connection. Whether you’re upgrading or new to extenders, do the following:
Get the Extender
- Remove the RE7350 from its packaging.
- Make sure your Internet connection and reliable Wi-Fi router are operational.
First Placement
- To facilitate configuration, first place the extender close to the router.
- Afterwards, you may move it halfway between your router and places with poor Wi-Fi.
Boost Your Power
- Connect the RE7350 to a power supply.
- Hold off until the power LED solidifies, signifying that it is prepared.
Select the Setup linksys extender Method
- WPS (Push Button): Within two minutes, hit WPS on both the router and the extender if your router has one.
- Web Setup: If there isn’t a WPS button or you would rather do it by hand.
Link to the Extender’s Network
- Navigate to the Wi-Fi settings on your phone, tablet, or laptop.
- Start by connecting to the network using Linksys.
Go to the Setup Portal
- Launch a web browser and enter http://extender.linksys.com into the address bar.
- The Linksys Smart Wi-Fi setup assistance launches as a result.
Observe the On-Screen Instructions
- When asked, enter the Wi-Fi name and password for your router.
- Select the name of the extender network; for clarification, you can add _EXT.
Save, then restart
- After saving the settings, watch for the extender to restart.
- Reconnect gadgets to the expanded SSID.
Check Performance
- Check the strength of your phone’s signal by walking around your house.
- Try moving the extender to a different area if the performance is poor.
Advanced Advice
- If you require a lot of bandwidth for games or films, use the 5 GHz frequency.
- Position the extender in a clear, high space.
These instructions should enable your Linksys RE7350 to expand your Wi-Fi in a seamless and efficient manner.
For more details visit our webpage.